Can I burn with low humidity?

Burning with relative humidity below 25% can be tricky as spotfires are likely and suppression becomes challenging. However, under certain circumstances with the proper preparation and a recognition and understanding of the risks, it is possible to safely burn under low humidity conditions. Examples of potential mitigating circumstances include the surrounding area, particularly downwind of the burn unit, is 1) “green” as a result of irrigation practices; 2) recently burned and devoid of fine fuels; 3) a body of water; or 4) bare or fallow agriculture land.

After a low-humidity burn, make sure to mop-up well and mitigate any possible issues near the fire line. Standing trees and down logs can burn for days or weeks in the right conditions. Monitor wind speed and direction as long as the burn unit is still burning or smoldering.

Has fire frequency changed in the United States over time?

For most of the United States, current fire frequencies are longer than what historically occurred prior to European settlement. In part, this can be attributed to fire suppression and exclusion efforts. This is particularly true for the eastern 2/3 of the nation. There are some areas of the western United States that are experiencing more frequent fire due to exotic annual grass invasion. For further information about specific areas of the country visit http://www.landfire.gov/.

Using Prescribed Fire to Control Invasive Plant Species

Eastern Redcedar

Prescribed burning is a vital part of successful land management in grassland and shrubland landscapes. Restoring fire often results in increased vegetation productivity and diversity of species (both plants and wildlife). There is great interest in using prescribed burning to restore pastures that are overrun by invasive plant species, particularly with the rising cost of herbicides. Several factors are important when considering whether prescribed fire will be useful in controlling invasive species.

Plant type

Successful control of invasive plant species often is determined by the type of plant that is targeted. Generally there are two broad categories used to characterize plants 1) resprouters and 2) non-resprouters. Resprouting plants are those that are capable of growing again from roots when the top is removed. Non-resprouting plants are incapable of growing again after the top is removed and die. Prescribed burning can be a very successful strategy when trying to control non-resprouting plants as it often will kill the plant. Resprouting plants can be much more difficult to control and fire is often used in tandem to other control methods such as grazing, herbicides and mechanical control.

Fire Return Interval

The fire return interval is how often a particular piece of land is burned. For example, if a pasture is burned every three years, then the fire return interval would be three years. Native plants evolved in regions with specific fire return intervals. For grasslands, research suggests that fire return intervals for tallgrass prairie were 3-5 years, 4-7 years for mix-grass prairie and 7-15 years for less productive short grass prairie. In western landscapes, return intervals can be much longer with sagebrush ecosystems burning every 50-100 years. Burning within these suggested return intervals will promote the plants native to that region. Burning more or less frequently may harm native plants and allow exotic and invasive plants to become more abundant.

Season of burn

Many regions have seasons when fire is more common than others. In landscapes where snow covers the vegetation during winter months, fire is limited to summer and fall months. Other regions where winters are mostly snow free, fire is common throughout the year. Plants that evolved with fire seem to be less affected by season of burn than those that evolved without fire. Burning plants when they are actively growing is a good strategy to suppress growth and reproduction of invasive plants. Over several burn cycles, this can greatly reduce the abundance of the target plant in pastures. Also, burning when plants are growing can be safer because fires are often slower and less intense.     

Prescribed burning can be used to control invasive species, but a one-size fits all approach will not work and invasive species control must be included in a successful fire prescription.

Can prescribed fire be used to manage sericea lespedeza?

Fire is one management tool that can be used to control the dominance of sericea lespedeza (Lespedeza cuneata). Data from Kansas and Oklahoma suggests growing-season fire can be more detrimental to sericea than dormant-season fire. Prescribed fire can limit sericea seed production if burned before the plant produces seed. Following fire, sericea is palatable to livestock as tannin levels are lower immediately following germination or resrouting as compared to a mature plant. Using a patch-burning system (e.g., burning a portion of a pasture each year) higher levels of sericea consumption by livestock have been demonstrated as cattle concentrate or continuously graze on the recently burned patch. Using patch-burning, coverage of sericea has increased at a lower rate as compared to more traditional fire and grazing applications where the entire pasture is burned. In some cases, a combination of burning, grazing and herbicide applications may be necessary to control sericea.

Can I use herbicide, grazing, or mechanical methods rather than prescribed fire?

This depends on your management goals and objectives. Consider the fact that fire has unique properties and different effects that cannot be completely duplicated with other methods. For example, the heat from fire is necessary for seed germination in some plant species, the chemical-physical reaction from fire can alter nutrient availability and affect forage palatability, and increased soil temperature following fire can alter plant emergence in spring. The opposite also holds true.  That is, herbicide, grazing, and mechanical methods can produce results that fire cannot exactly duplicate. Therefore, it is important to understand and define your management objectives in order to best apply the appropriate practice(s). Visit with your local Extension agent or specialist to help make this determination.

Do prescribed fires kill wildlife?

Rarely are wildlife directly killed by a prescribed fire. Most wildlife are able to leave an area before it burns. Fossorial species retreat underground as the fire passes. However, there are some species, such as those that are less mobile, that are more susceptible to direct mortality. Generally, reptiles and amphibians are more at risk than mammals or birds. Fire can indirectly impact wildlife either positively or negatively by changing plant community composition and structure.

Does fire occur in wetlands?

Yes, many wetlands do periodically burn, both from wildfire and prescribed fire. Many wetlands are only seasonally wet, so they are susceptible to fire during the dry period. Fire can be used to alter the structure of vegetation in a wetland to meet certain management objectives. A specific example includes burning cattail mashes in the Northern Great Plains to benefit waterfowl. Also, periodic wildfire in the Everglades is important to remove accumulated peat from wetlands which allow for greater water depth during wet periods. These deep water areas are important for certain wildlife species such as the American alligator.

Where can I get help developing a prescribed fire plan?

There are numerous private organizations as well as state and federal agencies that may be willing to assist landowners with writing prescribed fire plans. For example, check with the local county Cooperative Extension office, state forestry department, state wildlife or conservation department, the regional Natural Resource Conservation Service office, or a local, state or national conservation group. There are also many well qualified private consultants that can provide custom made prescribed fire plans to fit any situation. Check with your state prescribed fire council for additional guidance (Coalition of Prescribed Fire Councils).

Is successful completion of a course or class required before conducting a prescribed fire?

Generally speaking as it relates to state laws and regulations for private individuals, there are no courses or classes that are required before conducting a prescribed fire. However, classroom instruction as well as on-the-ground experience is recommended before organizing and conducting your first prescribed burn. Contact your county Extension agent, state prescribed burn association, or state forestry department for information about prescribed fire classes and training.